eSUN-ePLA-Gloss Filament,Black 1.75mm, 1kg/roll
Description:
When printing with ePLA-Gloss, there will be no irritating smell, which is safe and environmentally friendly; The spool is based on PETG, ABS, PLA and other production wastes and industrial wastes, which are recycled and injected;And the outer box is made of recyclable cartons. eSUN’s concept of environmental protection makes 3D printing more sustainable.The ePLA-Gloss are not easy to be brittle, and the printing is smooth for a long time without clogging. This pla filament can be used for early concept models and rapid prototyping.
Selling point:
Green and environment-friendly
High cost – effective
High speed printing
The support is easy to remove
Easy to print
Hard to break
Shinny appearance
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | ePLA-Gloss |
| Density(g/cm3) | 1.26 |
| Heat Distortion Temp(℃,0.45MPa) | 56.70 |
| Melt Flow Index(g/10min) | 3.3(190℃/2.16kg) |
| Tensile Strength(MPa) | 64.51 |
| Elongation at Break(%) | 31.54 |
| Flexural Strength(MPa) | 68.99 |
| Flexural Modulus(MPa) | 1514.78 |
| IZOD Impact Strength(kJ/㎡) | 7.9 |
| Durability | 4/10 |
| Printability | 9/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 190 – 230℃ Recommended temperature：210℃ |
| Bed temperature(℃) | 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
| Feature | |
| Flexible | —— |
| Elastic | —— |
| Impact Resistant | —— |
| Soft | —— |
| Composite | —— |
| UV Resistant | —— |
| Water Resistant | —— |
| Dissolvable | —— |
| Heat Resistant | —— |
| Chemically Resistant | —— |
| Fatigue Resistant | —— |
| Need drying | —— |
| Heated Bed Required | —— |
| Print recommend | —— |
For more Filament Filament
For 3D printers 3D Printers
can u improve the ui
