- Chiron Board with motor drivers
Chiron Board Printer ANYCUBIC TriGorilla Integrated Mainboard Compatible Mega2560 & RAMPS1.4 Combo Control Board 4 Layers PCB Controller Board for 3D Printer RepRap Mendel I3.
TriGorilla is an integrated mainboard that is integrated with the mighty function of the Mega2560+ramps 1.4 with respect to both software and hardware and has more premium features; the streamlined interfaces effectively avoid unnecessary troubles and power than Ramps 1.4 + Mega2560, it is a feature-rich all-in-one electronics solution for RepRap Mendel Prusa and other CNC devices.
- Main Control Chip: ATMEGA256016AU
- Input Power: 10V ~ 30V
- Standby Current: 35mA±5mA
- Stepper Motor Drivers: 5 channel Max
- Hotbed Output Control: 1 channel
- Heated output control: 2 channels
- under-current output control: 3 channels
- Dimensions: 125mm x 82mm
simple to install:
Integrated with the mighty function of the Mega2560+ramps 1.4 kit, Great reduces the wiring problem, more convenient connection, and is more stable.
Convenient to use:
TriGorilla motherboard supports LCD2004 and LCD12864 without using an adapter, and there are two choices for mainboard power supply, you can choose a DC power supply connection or directly from the terminal, it is convenient to use.TriGorilla uses CP2102 chip as a serial port communication, communication is not only stable but also avoid the repeated to install the driver(There will be increased “COM” port when replacing the traditional 2560 board, So for those people who need to do a batch purchasing test, the “COM” increases to a certain value will lead to can’t upload the firmware problem.)
Firmware can use the same configuration as ramps1.4, the marlin firmware which runs in Mega2560+ramps 1.4 kits can directly run in the TriGorilla board.
voltage input at a super wide range, short-circuit protection:
TriGorilla adopts DC-DC step-down scheme design and Recoverable fuse for short-circuit protection, improving the MEGA2560 board serious heating problem, Allowing any power supply from 10V-30V.
Support up to 5 motor drivers, support A4988/ DRV8825 /TMC2100 driver:
The motor drive circuit doesn't integrate into the circuit board. You can change any stepper motor driver you need, which is easier to operate. (Support A4988/ DRV8825 /TMC2100 driver)
Rich expansion port:
TriGorilla had reserved SERVO, UART, IIC expansion, so you can use it to realize automatic leveling, control touch screen smart controller, control wireless module and the detection of break, etc.
widely used in 3D printers, e.g., i3 Mega, Mega-s, corexy, etc.
As pictured below, there are two choices for motherboard power supply, choose one of them according to what you need
Feel free to buy from our store.