Lacner3D Printing Services Egypt-3D Printers Egypt Store

servo motor

servo motor It is of great quality and performs well at a low cost. Meanwhile, it is light in weight and tiny in size. It appears to be a useful tool for you. Used for fixed-wing, helicopter, KT, glider, small robot, robotic arm and other models.

Specification:

1. Model: SG90
2. Weight: 9g
3. Stall torque: 1.8kg/cm
4. Operating speed: 0.1sec/60degree
5. Operating voltage: 4.8V
6. Temperature range: 0℃ ~ +55℃
7. Dead band width: 10us
8. Maximum rotation angle: 180 degrees
9. Gear medium: nylon
10. Working mode: Simulation
11. Circuit connection:
12. Yellow line (signal line)
13. Red line (power line)
14. Brown (ground)

Package includes:

4* SG90 9g Micro Servos

How to connect SG90 micro servo motor to Arduino Uno?

The Arduino connection is really simple. There are three leads on the servo. The brown one is the Arduino Ground, so attach to it. The red one is VCC, which typically demands a voltage of four to seven points two volts. As a result, attach it to the Arduino 5V. The control signal, which is the orange lead, must have a periodic time of twenty milliseconds, or 50 Hertz, and a duty cycle of one to two milliseconds, or five to ten percent. The -90° position of the motor shafts is represented by a one time of one millisecond, the 0° position by one point five milliseconds, and the plus 90° position by two milliseconds. This implies that the shaft a total of 180°can be rotated.

Feel free to buy from our store.